1. Find the trailer hook position behind the traction vehicle and the front of the traction vehicle. A lot of car trailer hook position design in the lower part of the bumper, generally in the vehicle use manual to mark a clear position, the owner can also be observed before and after the bumper found a hidden space, where the use of circular or square cover is the position of the car trailer hook location.
2. Some car trailer hooks are split and need to be assembled when used. After removing the lid from the bumper, assemble the hook to carry with the car.
3. Install trailer tools. Whether the use of soft or hard trailer tools, when installed to ensure that the connection between the car is firmly and reliably linked to the design of a safety lock on the hook to lock in place. Check the connection again before the trailer is traveling. Both ends without the installation of the tow hook of the soft trailer rope in use to tie a knot, if the knot after a huge traction pull will make the tow rope difficult to untie.
4. The towing vehicle uses 1 gears to start, guarantees the big torque to provide sufficient traction force, at the same time the tractor needs to control the speed, maintains the smooth driving, when feels the slight resistance to increase the power output. Manual car type to avoid the lifting clutch pedal, the use of a slow start to the half linkage, to avoid damage to the vehicle.
- What's A Trailer?
- Brief Introduction Of Heavy Steel Flatbed Trailer
- Design Requirements For Trailers
- Trailer Considerations
- Pay Attention To Fuel Consumption When Using Fl...
- The Importance Of Chassis For Flatbed Trailers
- What Is A Truck?
- Definition Of Truck
- The Development Of The Truck
- Classification Of Trucks
- The Development Course Of Truck
- The Development Trend Of Truck
- The Marketing Construction Of Truck